Commercial Inverter Plus Pro Heat Pump

Hidrotermal Heater Pump range represents the very latest edge on water heating technology.

  • High performance design for an easy.
  • Rapid-Heat efficiency.
  • Easy to install and within a low energy consumption and operating cost.

 

Category:

    • Full DC inverter.
    • High-End Mitsubishi Compressor.
    • R32 / R410A Refrigerant.
    • Outstanding efficiency.
    • Ultra Silent Operation.
    • WIFI Controller.
    ModelInverter Plus Pro 70Inverter Plus Pro 103Inverter Plus Pro 133
    Heating Capacity at Air 26℃, Water 26℃,Humidity 80%
    Heating Capacity(kW)70-16.5103-24.8136-32.4
    Power Input(kW)10.03-1.0214.8-1.5419.46-2.01
    COP16.11-6.9816.09-6.9616.15-6.99
    Heating Capacity at Air 15℃, Water 26℃,Humidity 70%
    Heating Capacity(kW)51-12.176-18.3101-23.9
    Power Input(kW)10.24-1.615.29-2.4220.24-3.15
    COP7.56-4.987.55-4.977.59-4.99
    Cooling Capacity at Air 35℃, Water 27℃
    Cooling Capacity(kW)38-9.158-14.176-18.5
    Power Input(kW)10.41-1.3615.89-2.1120.65-2.74
    EER6.69-3.656.68-3.656.74-3.68
    ModelInverter Plus Pro 70Inverter Plus Pro 103Inverter Plus Pro 133
    Power supply380-415V/3/50Hz
    Rated Power Input(kW)10.015.020.0
    Rated Current(A)182736
    Max Power Input(kW)15.022.030.0
    Max Current(A)263854
    RefrigerantR32
    Compressor TypeMitsubishi inverter
    Heat ExchangerTitanium
    Expansion ValveElectronic EEV
    Air Flow DirectionVertical
    Water Flow Volume(m³/h)203040
    Working temp.range(℃)-15~43-15~43-15~43
    Heating temp.range(℃)15~4015~4015~40
    Cooling temp.range(℃)8~288~288~28
    Noise(dB)≤68≤71≤73
    Water Connection(mm)636375
    Net Weight(kg)280420750
    Gross Weight(kg)320460810
    Net Dimensions(mm)1416*752*10551250*1080*18702150*1080*2180
    Package Dimensions(mm)1580*880*11501300*1100*19502230*1120*2200

    Manual and Catalogue

    MANUAL
    Manual for HT Inverter Plus Pro Heat Pump.pdf
    CATALOGUE
    HT Inverter Plus Pro Heat Pump Catalogue.pdf

    Picture

    Productos

    • This field is for validation purposes and should be left unchanged.